EasyManuals Logo

Epson EB-S04 User Manual

Epson EB-S04
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
94
Setting Up Projector Network E-Mail Alerts
You can set up the projector to send you an e-mail alert over the network if
g
Select a number for the SMTP server Port Number, from 1 to 65535
there is a problem with the projector. (default is 25).
If you set the Standby Mode setting to Communication On in the projector's
h
Choose an address field, enter the e-mail address, and select the alerts
ECO menu, you can receive the e-mail alerts even if the projector is in
you want to receive. Repeat for up to three addresses.
standby mode (when the power is off).
Your e-mail address can be up to 32 alphanumeric characters
a
Press the [Menu] button on the control panel or remote control.
long.
a
b
Select the Network menu and press [Enter].
i
When you finish selecting settings, select Complete and follow the on-
c
Select Network Configuration and press [Enter].
screen instructions to save your settings and exit the menus.
d
Select the Mail menu and press [Enter].
If a critical problem causes a projector to shut down, you may not
receive an e-mail alert.
a
gg Related Links
"Network Projector E-mail Alert Messages" p.94
"Projector Setup Settings - ECO Menu" p.115
Network Projector E-mail Alert Messages
When a problem occurs with a projector on the network, and you selected to
receive e-mail alerts, you receive an e-mail containing the following
information:
Address for Address 1 as the mail sender
Epson Projector in the subject line
e
Set the Mail Notification setting to On.
The name of the projector experiencing a problem
The IP address of the affected projector
f
Enter the IP address for the SMTP Server option.
Detailed information about the problem
Do not use these addresses: 127.x.x.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
a

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-S04 and is the answer not in the manual?

Epson EB-S04 Specifications

General IconGeneral
Native aspect ratio-
Projection distance1.77 - 2.4 m
Projection technology3LCD
Contrast ratio (typical)15000:1
Projection distance (wide)0.88 - 10.44 m
Projector native resolutionSVGA (800x600)
Keystone correction, vertical-30 - 30 °
Keystone correction, horizontal- 30 - 30 °
Projector brightness (economic mode)2100 ANSI lumens
FocusManual
Throw ratio1.45 - 1.96:1
Digital zoom1.35 x
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source5000 h
Service life of light source (economic mode)10000 h
RMS rated power1 W
Number of built-in speakers1
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Built-in displayNo
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.26 W
Power consumption (typical)277 W
Power consumption (economy mode)207 W
Ethernet LAN (RJ-45) ports0
Cables includedAC, VGA
Remote control typeIR
Operating altitude0 - 3000 m
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)28 dB
USB connector typeUSB Type-A, USB Type-B
HDMI connector typeFull-size
USB 2.0 ports quantity2
Pallet width800 mm
Pallet height1190 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet78 pc(s)
Quantity per pallet layer6 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth234 mm
Width297 mm
Height77 mm
Weight2400 g
Package depth360 mm
Package width350 mm
Package height160 mm
Package weight3829 g

Related product manuals