Epson EB-S04 User Manual

EB＊＊＊＊
＊＊
85
Wireless Network Projection
b
Select the Network menu and press [Enter].
k
To prevent the SSID or IP address from being displayed on the standby
a
To access your wireless utility software, double-click the network icon
screen, set the SSID Display setting or the IP Address Display setting on the Windows taskbar.
to Off.
b
When connecting in Advanced connection mode, select the network
l
When you have finished selecting settings, select Complete and then name (SSID) of the network the projector is connecting to.
follow the on-screen instructions to save your settings and exit the
menus.
c
Click Connect.
m
Press the [LAN] button on the remote control.
Selecting Wireless Network Settings in OS X
The wireless network settings are complete when you see the correct IP
address on the LAN standby screen.
Before connecting to the projector, select the correct wireless network in OS
X.
a
Click the AirPort icon on the menu bar at the top of the screen.
b
When connecting in Advanced connection mode, make sure AirPort is
turned on and select the network name (SSID) of the network the
projector is connecting to.
Setting Up Wireless Network Security
You can set up security for your projector to use on a wireless network. Set up
When you have finished making wireless settings for your projector, you need
one of the following security options to match the settings used on your
to select the wireless network on your computer. Then start the network
network:
software to send images to your projector through a wireless network.
• WPA2-PSK security
If you use the EasyMP Network Projection software, make sure you
• WPA/WPA2-PSK security
select the connection mode that matches the projector's connection
a
mode you selected.
Contact your network administrator for guidance on entering the
correct information.
a
Selecting Wireless Network Settings in Windows
a
Press the [Menu] button on the control panel or remote control.
Before connecting to the projector, select the correct wireless network on your
computer.

Epson EB-S04 Specifications

General

Native aspect ratio	-
Projection distance	1.77 - 2.4 m
Projection technology	3LCD
Contrast ratio (typical)	15000:1
Projection distance (wide)	0.88 - 10.44 m
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Keystone correction, horizontal	- 30 - 30 °
Projector brightness (economic mode)	2100 ANSI lumens
Focus	Manual
Throw ratio	1.45 - 1.96:1
Digital zoom	1.35 x
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	10000 h
RMS rated power	1 W
Number of built-in speakers	1
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Built-in display	No
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.26 W
Power consumption (typical)	277 W
Power consumption (economy mode)	207 W
Ethernet LAN (RJ-45) ports	0
Cables included	AC, VGA
Remote control type	IR
Operating altitude	0 - 3000 m
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Noise level	37 dB
Country of origin	Philippines
Noise level (economic mode)	28 dB
USB connector type	USB Type-A, USB Type-B
HDMI connector type	Full-size
USB 2.0 ports quantity	2
Pallet width	800 mm
Pallet height	1190 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	78 pc(s)
Quantity per pallet layer	6 pc(s)

Weight and Dimensions

Depth	234 mm
Width	297 mm
Height	77 mm
Weight	2400 g
Package depth	360 mm
Package width	350 mm
Package height	160 mm
Package weight	3829 g