Epson EB-S04 User Manual

136
Projector Indicators Status
Indicator and status Problem and solutions Indicator and status Problem and solutions
Power: Off Lamp has a problem. Power: Off Power error (Ballast). Turn the projector off, unplug it,
and contact Epson for help.
Status: Flashing blue Status: Flashing blue
• Check to see if the lamp is burned out, broken, or
installed incorrectly. Reseat or replace the lamp as
Lamp: Lit orange Lamp: Lit orange
necessary.
Temp: Off Temp: Lit orange
• Clean the air filter.
• If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Wireless LAN indicator Problem and solutions
Extended menu.
and status
s Extended > Operation > High Altitude Mode
Lit blue Wireless LAN is available.
• If the problem persists, unplug the projector and
Flashing blue (quickly) Connecting to a device.
contact Epson for help.
Lamp cover has a problem.
Flashing blue (slowly) An error has occurred. Turn off the projector and restart
it.
• Check that the lamp and the lamp cover are securely
If this does not solve the problem, contact Epson for
installed. The lamp does not turn on if the lamp and
help.
the lamp cover are not installed correctly.
Off Wireless LAN is not available. Make sure the Wireless
Power: Flashing blue Replace the lamp soon to avoid damage. Do not
LAN settings are correct.
continue using the projector.
Status: Indicator status
varies
Lamp: Flashing orange
If the indicators display a pattern not listed in the table above, turn the
Temp: Indicator status
projector off, unplug it, and contact Epson for help.
a
varies
Power: Off A fan or sensor has a problem. Turn the projector off,
gg Related Links
unplug it, and contact Epson for help.
Status: Flashing blue
• "Cleaning the Air Filter and Vents" p.125
Lamp: Off
• "Replacing the Air Filter" p.125
Temp: Flashing orange
• "Replacing the Lamp" p.127
Power: Off Internal projector error. Turn the projector off, unplug
it, and contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Off
Power: Off Auto iris error. Turn the projector off, unplug it, and
contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Flashing orange

Epson EB-S04 Specifications

General

Native aspect ratio	-
Projection distance	1.77 - 2.4 m
Projection technology	3LCD
Contrast ratio (typical)	15000:1
Projection distance (wide)	0.88 - 10.44 m
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	-30 - 30 °
Keystone correction, horizontal	- 30 - 30 °
Projector brightness (economic mode)	2100 ANSI lumens
Focus	Manual
Throw ratio	1.45 - 1.96:1
Digital zoom	1.35 x
Lamp type	UHE
Lamp power	200 W
Light source type	Lamp
Service life of light source	5000 h
Service life of light source (economic mode)	10000 h
RMS rated power	1 W
Number of built-in speakers	1
Placement	Desktop, Ceiling
Product type	Standard throw projector
Product color	White
Built-in display	No
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.26 W
Power consumption (typical)	277 W
Power consumption (economy mode)	207 W
Ethernet LAN (RJ-45) ports	0
Cables included	AC, VGA
Remote control type	IR
Operating altitude	0 - 3000 m
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Noise level	37 dB
Country of origin	Philippines
Noise level (economic mode)	28 dB
USB connector type	USB Type-A, USB Type-B
HDMI connector type	Full-size
USB 2.0 ports quantity	2
Pallet width	800 mm
Pallet height	1190 mm
Pallet length	1200 mm
Pallet width (UK)	1000 mm
Quantity per pack	1 pc(s)
Quantity per pallet	78 pc(s)
Quantity per pallet layer	6 pc(s)

Weight and Dimensions

Depth	234 mm
Width	297 mm
Height	77 mm
Weight	2400 g
Package depth	360 mm
Package width	350 mm
Package height	160 mm
Package weight	3829 g