98 Using the PostScript Printer Software (Windows)
Restore Defaults
Click this button to reset the settings on this sheet to their default
values.
Device Options tab settings
Available printer memory (in KB)
Specify the amount of available printer memory. If the entered
value does not match the actual amount of memory on the printer
and printing problems occur, change the setting.
Available font cache (in KB)
Displays the amount of font cache memory available to Type 32
fonts. The printer driver automatically adjusts the font cache size
according the memory setting specified under Installable options.
RITech
Select whether to use RITech when printing. RITech improves the
appearance of printed lines, text, and graphics. The options are
On and Off.
Toner Save Mode
Select whether to use the Toner Save Mode when printing. When
the Toner Save Mode is turned on, the printer uses about 50% less
toner than normal. The options are On and Off.
Image Protect
This setting enables you to specify whether to use lossy
compression when memory runs low during printing. The
options are On and Off. When Image Protect is set to On, lossy
compression is not used. If it is set to Off, lossy compression is
used when memory resources are too low.
To Next Page
Loading...
