106 Using the PostScript Printer Software (Windows)
Advanced tab settings
EPSON EPL-N3000 PS3 Document Settings
Undo Changed Option/s
Click this button to undo all the changes that have been made to
the settings. The settings return to their default values. This
button is enabled only if one or more of the default values have
been changed.
About Adobe PostScript Printer Driver
Click this button to view information on the currently installed
PostScript printer driver.
Paper/Output
Paper Size
If you specified the Paper Size setting on the Page Setup sheet,
that setting is reflected here. To change this setting, select the
desired paper size from the options displayed at the bottom of the
dialog box. For more information on this setting, see “Paper Size”
on page 104.
Orientation
If you specified the Orientation setting on the Page Setup sheet,
that setting is reflected here. To change this setting, select the
desired orientation from the options displayed at the bottom of
the dialog box. For more information on this setting, see
“Orientation” on page 105.
Paper Source
If you specified the Paper Source setting on the Page Setup sheet,
that setting is reflected here. To change this setting, select the
desired paper source from the options displayed at the bottom of
the dialog box. For more information on this setting, see “Paper
Source” on page 105.
Media
Select the desired paper type to print on. The options are Normal,
Thick, Transparency, and Extra Thick. Make sure to select the
correct paper type to avoid smearing or wasting ink.
To Next Page
Loading...
