116 Using the PostScript Printer Software (Windows)
Printer driver settings
Printer settings specific to your printer are available through the
Device Settings tab of the printer’s Properties dialog box. In
addition to the settings there, click the Printing Preferences
button on the General sheet or the Printing Defaults button on the
Advanced sheet for more print settings. The basic print settings
are grouped under the Layout and Paper/Quality tabs, while more
advanced settings are available by clicking the Advanced button
on either sheet.
Online help is also available to help you with the settings. There
are two online help options. Click the Help button for procedural
help on the settings. If you want help on a particular item, click
the ‘?’ icon on the top-right corner of the dialog box’s title bar and
then click the name of the setting that you want more information
on. An explanation of the setting and its options will be displayed.
Device Settings tab settings
Form To Tray Assignment
Assign the desired paper size to the various available paper
sources. Once this setting is specified, the printer will
automatically feed paper from the paper source that holds the
selected paper size.
The paper source options are MP Tray, Cassette 1, Cassette 2,
Cassette 3, Manual Feed 1st Page, and Manual Feed EachPage.
However, the actual paper sources that are available will differ
according to the options installed.
The paper sizes that are available will differ according to the
printer. The default setting is either A4 or Letter, depending on
your country of purchase.
Font Substitution Table
Double-click to display the Font Substitution Table and the
options for the TrueType-to-PostScript font mapping.
To Next Page
Loading...
