120 Using the PostScript Printer Software (Windows)
Pages Per Sheet
Specify how many pages of your document to print on one sheet
of paper. The options are 1, 2, 4, 6, 9, and 16.
Paper/Quality tab settings
Paper Source
Select the paper source for your print job. The options are Auto
Tray Select, MP Tray, Cassette 1, Cassette 2, Cassette 3, Manual
Feed 1st Page, and Manual Feed EachPage. However, the actual
paper sources that are available will differ according to the
options installed.
Media
Select the desired paper type to print on. The options are Normal,
Thick, Transparency, and Extra Thick. Make sure to select the
correct paper type to avoid smearing or wasting ink.
Advanced settings
Paper Size
Select the desired paper size. This setting must match the size of
the paper loaded in the printer. The paper sizes that are available
will differ according to the printer. The default setting is either A4
or Letter, depending on your country of purchase.
Copy Count
Specify the number of copies to print.
Collated
This check box appears only if more than one copy is specified for
Copy Count. Select this check box to print multiple copies of the
document in page order. If this check box is not selected, each
page is printed out the specified number of times before the
following page is printed.
To Next Page
Loading...
