Using the PostScript Printer Software (Macintosh) 131
5
5
5
5
5
5
5
5
5
5
5
5
2. Select the item(s) that you want to install.
Note:
If you want information on a particular item, click the icon to
the right of that item.
3. Click Install.
4. When installation is done, click Quit.
5. Restart your computer.
This completes the installation of the printer software. You now
need to select the printer driver as described in the next section.
If you are not able to print after a Custom Install, perform the Easy
Install installation to copy all necessary files to your computer.
If you are connecting two or more printers of the same model
using AppleTalk, and you want to rename the printer, see the
Network Guide that shipped with the printer.
To Next Page
Loading...
