216 Installing Options
w
Warning:
Tighten the screw firmly to prevent the printer’s right side
cover from the falling off when moving the printer.
12. Reconnect the interface cable and power cord and turn the
printer on.
To confirm that the option is installed correctly, print a status
sheet. See “Printing a Status Sheet” on page 260.
Note:
If you are using Windows, and EPSON Status Monitor 3 is not
installed, you have to make settings manually in the printer driver. Click
the Update the Printer Option Information Manually button on the
Optional Settings menu, then click Settings. Then select the Optional
HDD Unit check box on the Optional Settings dialog box and click OK.
Removing the Hard Disk Drive
Perform the installation procedure in reverse.
To Next Page
Loading...
