300 Troubleshooting
Manual Feed xxx
The manual feed mode is specified for the current print job. Make
sure the paper size indicated by xxx is loaded, then press the N
Start/Stop button.
For details on the manual feed mode, see “Manually feeding
paper” on page 19.
Mem Overflow
The printer has insufficient memory to execute the current task.
Press the N Start/Stop button on the control panel to resume
printing. Or press the Cancel Job button to cancel the print job.
Menus Locked
This message appears if you try to change the printer’s settings
through the control panel when the buttons are locked. You can
unlock them by using the EPSON WinAssist or WebAssist utility.
Refer to the Network Guide for information.
Need Memory
The printer has insufficient memory to complete the current print
job.
Jam MP A
Jam C1 A
Jam C2 A
Jam C3 A
Paper is jammed inside the optional lower cassette. For
instructions on how to remove jammed paper in the optional lower
cassette, see “Jam MP A, Jam C1 A, Jam C2 A, Jam C3 A (All
paper cassettes and Cover A)” on page 254.
Jam DM Paper is jammed inside the optional Duplex Unit’s paper path or
cover (Duplex Unit cover). For instructions on how to remove
jammed paper at the Duplex Unit, see “Jam DM (Duplex Unit
cover)” on page 257.
Jam STK Paper is jammed inside the optional Stacker’s paper path or cover
(cover xx). For instructions on how to remove jammed paper at the
Stacker, see “Jam STK” on page 258
To Next Page
Loading...
