336 Technical Specifications
*Unless specifically instructed in this guide, do not insert your hand into the her, as it may be
very hot.
❏ Do not insert your hand deep into the fuser unit, as some
components are sharp and may cause injury.
❏ Avoid touching the components inside the printer unless
instructed to do so in this guide.
❏ Never force the printer’s components into place. Although the
printer is designed to be sturdy, rough handling can damage
it.
❏ When handling an imaging cartridge, always place them on
a clean, smooth surface.
❏ Do not attempt to modify an imaging cartridge or take them
apart. They cannot be refilled.
❏ Do not touch the toner. Keep the toner away from your eyes.
❏ Do not dispose of used imaging cartridge and fuser unit in
fire, as they can explode and cause injury. Dispose of them
according to local regulations.
❏ If toner is spilled, use a broom and dustpan or a damp cloth
with soap and water to clean it up. Because the fine particles
can cause a fire or explosion if they come into contact with a
spark, do not use a vacuum cleaner.
❏ Wait at least one hour before using an imaging cartridge after
moving it from a cool to a warm environment to prevent
damage from condensation.
❏ Be sure to keep consumables out of the reach of children.
❏ Do not leave jammed paper inside the printer. This can cause
the printer to overheat.
❏ Avoid sharing outlets with other appliances.
To Next Page
Loading...
