354 Functions of the Control Panel
Lang
Specifies the language displayed on the LCD panel and that
printed on the status sheet.
Time Out
Specifies the length of the time the printer waits when it is ready
to print and no new data is received. When this time is up, the
printer searches for new print data from other interfaces.
Paper Source
Specifies whether paper feeds into the printer from the MP tray,
the standard cassette, or from the optional Universal Cassette
Unit, when Normal is selected as the Paper Type setting.
If you select Auto, paper feeds from the paper source containing
paper that matches your Paper Size setting.
If an envelope size (IB5, C10, C5, DL, MON, C6) is selected as the
Page Size setting, paper always feeds from the MP tray. If you
select Thick, Thick N, Thick R, or Trnsprnc as the Paper Type
setting, paper always feeds from the MP tray.
Out Bin
Specifies the output tray when the optional Stacker is installed.
Stacker
The stacker has been removed while the printer was on. Turn the
printer off, reinstall the Stacker, and then turn the printer on
again.
To Next Page
Loading...
