Using the Standard Printer Software 77
3
3
3
3
3
3
3
3
3
3
3
3
Re-printing your print job
Clicking the Print button on the EPSON Status Monitor 3 screen
lets you print a spooled job.
Follow the steps below to re-print your job.
Note:
You cannot re-print your jobs in the following cases.
❏ The status of the job is other than Held.
❏ The job is sent by someone other than you.
❏ When multiple jobs are selected
1. Access EPSON Status Monitor 3. See “Accessing EPSON
Status Monitor 3” on page 70 for details.
2. Click Job Information tab.
2. Job Name:Displays the user’s print job file names. Other user’s
print jobs are displayed as --------.
3 Job Type: Displays the job type. When the Reserve job
function is used, the jobs are displayed as Stored,
Verify, Re-Print, and Confidential respectively.
About the Reserve Job function, see “Using the
Reserve Job Function” on page 58.
4 Refresh
button:
Clicking this button refreshes the information on
this menu.
5 Print
button:
Display the dialog box to print the spooled and held
status job.
6 Cancel
Job
button:
Selecting a print job and clicking this button, cancels
the selected print job.
To Next Page
Loading...
