Epson EX11000 - Page 229

229
Setting Options Description
Quick Startup Off
20min.
60min.
90min.
Sets the time period for which
you want to be able to restart the
projector within five seconds of
turning it off (Quick Start mode).
It may take longer than five
seconds when projecting from
the projector's USB port or when
using the Screen Mirroring
features.
This setting is only displayed
when:
• A/V Output is set to While
Projecting in the projector's
Signal I/O menu
• Auto Power On is set to
HDMI1 and Power On Trigger
is set to Plug-in Detection in
the projector's Operation
menu, or
• Auto Power On is set to Off in
the projector's Network menu
USB Power On While Projecting
Always On
This setting is only displayed
when:
• A/V Output is set to While
Projecting in the projector's
Signal I/O menu
• Auto Power On is set to
HDMI1 and Power On Trigger
is set to Plug-in Detection in
the projector's Operation
menu, or
• Auto Power On is set to Off in
the projector's Network menu