Epson FX 890 - B/W Dot-matrix Printer User Manual

FX-1880/880 Service Manual
Chapter 1 Product Description
Rev.B
1-1
2
1.2.7 EEPROM Clear Function
You can change some parameters into the factory settings to perform panel operation easily.
Pressing
Tear off / Bin
and
Load / Eject
switches at same time while turning on the printer turns
the default settings into the factory settings:
Table 1-14. Cleared Items and Values on EEPROM (Standard Model)
Item Value
Character table selection PC437
Page length for rear tractor 11 inch
Page length for front tractor 11 inch
Page length for CSF bin 1 22 inch
Page length for CSF bin 2 22 inch
TOF adjustment value for rear tractor 8.5 mm
TOF adjustment value for front tractor 8.5 mm
TOF adjustment value for CSF bin 1 8.5 mm
TOF adjustment value for CSF bin 2 8.5 mm
TOF adjustment value for rear manual insertion 8.5 mm
TOF adjustment Value for front manual insertion 8.5 mm
Bottom margin for rear tractor 11 inch
Bottom margin for front tractor 11 inch
Font Selection Draft 10 cpi
Print direction setting Bi-D
I/F mode selection Auto
Auto I/F waiting time setting 10 sec.
Auto line feed Off
Auto tear off Off
Skip over perforation Off
High speed draft On
Input buffer On
Software ESC/P
0 slash Off
Buzzer On
Auto CR Off
Tear-off adjustment value 0
Manual insertion time 2 or 3 sec.
Tear-off wait time 3 sec.
I/F timing data BUSY timing data
TOF minimum value 4.2 mm
Paper edge length 0
Paper length for rear manual insertion 22 inch
Paper length for front manual insertion 22 inch
sub number for customization Standard

Epson FX 890 - B/W Dot-matrix Printer Specifications

General

Brand	Epson
Model	FX 890 - B/W Dot-matrix Printer
Category	Printer
Language	English