Paper Handling 25
2
2
2
2
2
2
2
2
2
2
2
2
3. Lower the tractor into the printer’s mounting slots and press
down both ends of the tractor to make sure that it is firmly
seated.
See “Loading paper with the rear push tractor” on page 25 for
instructions on loading continuous paper using the rear push
tractor.
Loading paper with the rear push tractor
Follow these steps to load paper using the rear push tractor:
1. Make sure the printer is turned off and the tractor is installed
in the rear push position. Also make sure the paper guide is
removed.
To Next Page
Loading...
