1-12 Setting Up the Printer
R4C4610
Rev. C
A5 size SETUP.FM
6/28/00 Pass 3
L
Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi
2. While holding down the
LF/FF
button, turn on the printer. The
PAUSE
light flashes.
3. Slide the left edge guide until it locks in place at the guide
mark. Next, adjust the right edge guide to match the width of
your paper.
4. Slide a sheet of paper down firmly between the edge guides
until it meets resistance. The printer loads the sheet
automatically.
To Next Page
Loading...
