To Next Page

To Previous Page

Using the Printer 2-31

R4C4610

Rev. C

A5 size USING.FM

6/28/00 Pass 3

Proof Sign-off:

SEI Y.Ohkawara K.Kono

K.Kono

SEI M.Kauppi

2. While holding down the

Tear Off

button, turn on the printer.

The printer enters the default-setting mode and prints the

language selection instructions.

3. Press the

LF/FF

button until the

Tear Off

lights indicate the

language you want, as described in the language selection

instructions.

4. Press the

Tear Off

button to print the default-setting mode

instructions (four pages) in the language you selected.

The printed instructions list the default settings you can

change, describe how to change them, and show you how the

control panel lights help you make settings. Follow these

instructions to change the default settings using the buttons

on the printer’s control panel.

Note:

The arrows on the instruction sheets indicate the printer’s current

settings.

5. When you finish making settings, make sure the printer is not

printing and then turn it off to exit the default-setting mode.

Any settings you have made remain in effect until you change

them again.

Note:

You may exit the default-setting mode by turning off the printer

when the printer is not printing.

Epson LX-300+ User Manual

Other manuals for Epson LX-300+