3
Using the Printer Software 3-11
R4C4610
Rev. C
A5 size SOFTWARE.FM
6/28/00 Pass 3
R
Proof Sign-off:
SEI Y.Ohkawara K.Kono
K.Kono
SEI M.Kauppi
Options dialog box
Once you’ve checked your printer driver settings and changed
them if necessary, you are ready to print with continuous paper
or single sheets as described in Chapter 2, “Using the Printer.”
❏ Dithering You can leave this option set to
Fine
,
which is the default setting, or select
another dithering pattern depending
on the kind of printout you want.
❏ Intensity Control Move the slider to make your printout
lighter or darker.
❏ Color The printer will print in color when
there is a checkmark in this check box.
If you want to print in monochrome or
gray scale, remove the checkmark.
❏ Print quality Select a print quality option from the
Print Quality list.
If you turn on High Speed, you will
enter bi-directional printing mode and
printing speed will increase.
Turning High Speed off will return the
printer to uni-directional printing
mode. Printing speed will decrease,
but printing precision will improve.
Default printing uses the settings
stored in the printer.
To Next Page
Loading...
Need help?
General
