RX4111CE Jump to Top / Bottom
ETM62E-02 Seiko Epson Corporation 18
Note: The initialization of the register is necessary about the unused function.
13.1. Overview of Functions
s
32 years
the /INT pin goes to low level and 1 is set to the TF bit to report
.
and the
.
oltage Drop Detection Function
Frequency Stop Detection Function
This flag bit indicates the retained status of clock operations or internal data. Its value changes from 0 to 1 when data loss
might have occurred due to a low supply voltage.
RAM register is read/write accessible for any data.
Built-in 8bit × 64word (512bit) RAM
When not use Timestamp function, it can use for users memory.
To Next Page
Loading...
