ETM62E Revision History
RX4111CE Jump to Top / Bottom
ETM62E-02 Seiko Epson Corporation 2
Note is added the Metal pad of package.
5.1. External Dimensions
V
VLF
characteristics was added.
"7. Recommended Operating Conditions"
AC characteristics of V
DD
=1.8V was updated.
Note and comment was updated for SPI control.
"9.2. AC characteristics"
As for time of auto release of timer interruption, Symbol name was
updated to tRTN2 from tRTN. "TSEL1, TSEL0 bit"
tiThe symbol of tRTN was separated to tRTN1 and tRTN2.
As for time of auto release of Time update interruption, Symbol name was
updated to tRTN1 from tRTN.
The symbol of tRTN was separated to tRTN1 and tRTN2.
Auto release time of Time update interruption was corrected.
, from 7.57 ms.
"14.4. Time Update Interrupt Function"
"Table 37 UIE bit (Update Interrupt Enable)"
"Figure 1 Time Update Interruption Timing Chart" has been revised.
When UF is cleared, /INT returns to Hi-Z, Immediately.
"Note in using small EDLC " is deleted.
Even if using small EDLC, This note desn't need. Page42
Bypass capacitor value was corrected.
0.1 from 1.0 " 15.Connection example"
Contacts list was updated. "Contacts"
The link to index was added to the all footer.
To Next Page
Loading...
