Epson SC-F9200 series - Control Panel and Display Functionality

SC-F9200 Series Revision C
PRODUCT DESCRIPTION Printing Specifications 16
SE Group Confidential (Related Staff Only)
1.3 Printing Specifications
1.3.1 Supported Media
PRINTABLE AREA
Note *1: The value selected for [Side Margin (Left)] in the setup menu. The default value is
5mm. Choose a [Side Margin (Left)] over 10 mm when using media holding plates.
*2: The total of the values selected for [Print Start Position] and [Side Margin (Right)] in
the setup menu. The default value is 5mm. Chose a [Print Start Position] or [Side
Margin (Right)] over 10 mm when using media holding plates.
Figure 1-2. Printable area
Table 1-8. Supported Media
Item
Specification
Standard Roll Media System
Roll core size 2 or 3 inch
Roll outer diameter Up to 300 mm
Media width 300 to 1625.6 mm (64 inches)
Media thickness Up to 1 mm
Roll weight Up to 40 kg
5mm
5mm
3-825mm*
2
3-25mm*
1
300-1625mm