Epson SC-F9200 series Service Manual

SC-F9200 Series Revision C
ADJUSTMENT Initial Ink Charge Flag 296
SE Group Confidential (Related Staff Only)
4.9 Initial Ink Charge Flag
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu] + [Back] + [OK].
2. Start the Service Program and select Initial Ink Charge Flag.
3. Select ON or OFF and click [Run].
4. Turn the printer OFF.
Figure 4-13. [Initial Ink Charge Flag] Screen

Epson SC-F9200 series Specifications

General

Brand	Epson
Model	SC-F9200 series
Category	Printer
Language	English