Epson SC-F9200 series - Exchange Parts

SC-F9200 Series Revision B
MAINTENANCE Exchange Parts 373
SE Group Confidential (Related Staff Only)
5.4 Exchange Parts
Exchange parts of this printer are as follows.
Note *1: M/C = Maintenance call
S/C = Service call
*2: See Chapter 2 “Troubleshooting” for details of maintenance call and service call.
*3: Replace the Ink Tank and PF Roller Center Support together at the same time.
*4: Replace the Ink Tube and CR Motor together at the same time.
Table 5-1. Exchange Parts
Class Parts Exchanger Life Exchange Timing (call) *1*2
Consumables
Wiper cleaner
User
---
If the printout is faint or smudged, or segments are missing
even after cleaning.
Wiper
---
If the printout is faint or smudged, or segments are missing
even after cleaning.
Wasted Ink Bottle
---
---
Periodic Replacement Parts
Ink Tank
*3
Serviceman
1.5 years on average
 M/C: None
 S/C: None
PF Roller Center
Support*
3
 51.4 km
 1.5 years
 M/C: None
 S/C: None
Mounting Plate Assy
 33km : when Take-up tension is max.
 100km : when Take-up tension is default.
 M/C: 00000400
 S/C: None
Life Parts
Print Head
 The number of fired ink droplets: 6,840,000,000,000
 3 years or more after ink is charged
 M/C: None
 S/C: None
Duct CR 400,000 times (Pump counter)
 M/C (Near end of life): 00000002
 S/C: 1435
Ink Holder Pump counter: 400,000 times
 M/C (Near end of life): 00000080, 00400000
 S/C: 1432, 1433
Ink Tube
*4
The number of CR pass: 6,750,000
 M/C (Near end of life): 00000200
 S/C: 1101
Pump Cap Unit Rotation: 1,150,000 (3 years)
 M/C (Near end of life): 00000040
 S/C: 1430, 1431
CR Motor
*4
The number of CR pass: 6,750,000 (3 years)
 M/C: None
 S/C: None