Epson SC-S30600 Series User Manual

SC-S30600 Series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 157
Confidential
3.4.5.21 IM Sensor
1. Unlock the CR Unit. (p82)
2. Remove the Left Rear Cover. (p94)
3. Remove the Left Upper Cover. (p95)
4. Remove the CR Cover. (p119)
5. Move the CR Unit to the left end.
6. Remove the Sensor Cover. (See Step 6 to Step 7
in “3.4.5.20 PW Sensor” (P.
155))
7. Disconnect the FFC from the connector of the IM Sensor, and remove the IM
Sensor.
Figure 3-113. Removing the IM Sensor
A D J U S T M E N T
R E Q U I R E D
When replacing/removing this part, refer to “4.1.2 Adjustment
Items and the Order by Repaired Part” (p200) and make sure to
perform the specified operations including required adjustment.
C H E C K
P O I N T
When replacing the IM Sensor, make sure to replace the PW
Sensor, too.
Before installing the IM Sensor to the CR Unit, insert its protruded
portion into the groove of the Sensor Cover.
IM Sensor
Sensor Cover
Should be engaged like this
- Bottom of the CR Unit -
IM Sensor
FFC

Epson SC-S30600 Series Specifications

General

Brand	Epson
Model	SC-S30600 Series
Category	Printer
Language	English