Epson SC-S30600 Series - Page 202

SC-S30600 Series Revision B
ADJUSTMENT Overview 202
Confidential
CR related
parts/units
CR Unit (CR Assy)
Replacement 1 p. 151
After
replacement
2 Turn the power on in normal mode. ---

3 CR Belt Tension Check

Tensimeter U-507

p. 233
4 APG function check

p. 236
5 CR Scale Check

p. 239
6 CR Active Damper Adjustment (Automatic)

p. 240
7 CR Motor Measurement & Automatic Adjustment

p. 274
8 Ink Mark Sensor check & auto adjustment

3M IJ40-10R

p. 238
9 Head inclination auto adjustment (CR direction)

3M IJ40-10R

p. 251
10 Head slant auto adjustment (PF direction)

3M IJ40-10R

p. 254
11 Auto Uni-d adjustment

3M IJ40-10R

p. 241
12 Auto Bi-d adjustment

3M IJ40-10R

p. 242
APG Motor Assy
Replacement 1 p. 138
After
replacement
2 Turn the power on in Serviceman mode. ---

3 Reset the motor counter.

--- p. 229
4 APG function check

p. 236
IM Sensor
Replacement 1 p. 157
After
replacement
2 Turn the power on in normal mode. ---

3 Ink Mark Sensor check & auto adjustment

3M IJ40-10R

p. 238
PW Sensor
Replacement 1 p. 155
After
replacement
2 Turn the power on in Serviceman mode. ---

3 Reset the sensor counter.

--- p. 229
4 Ink Mark Sensor check & auto adjustment

3M IJ40-10R

p. 238
Table 4-1. Adjustment items and the order by repaired part
Class
Replaced or Repaired
(Reattached) Part/Unit
Required Operations
Service
Program
Jig Media Replaced Reattached Page