Epson SC-S60600 Series - Page 28

Note:
If the roll of media has an outer diameter which
is less than 140 mm, the roll core will not reach
the holder when raised using the lift lever.
Raise it with your hands, and insert the roll core
onto the roll holder.
J
K
Note:
If the roll of media has an outer diameter which
is less than 140 mm, the roll core will not reach
the holder when raised using the lift lever.
Raise it with your hands, and insert the roll core
onto the roll holder.
L
To ensure the roll holder is inserted into the
roll core sufficiently, push it twice.
c
Important:
If the roll holder is inserted into the roll core
insufficiently, media is not fed correctly
during printing because of slippage between
the roll holder and roll core.
This may cause banding in the print results.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
28