Epson SC-S60600 Series User Manual

Q
Hold the center of the media in one hand, and
pull it straight until it is aligned with the
bottom edge of the label on the after heater.
Do not pull the media with both hands. This
could cause the media to skew or move around.
R
S
Tap lightly on both ends of the media, and
check if there is a difference in tension between
the left and right sides.
If there is a difference in tension, the media
becomes loose.
From the front of the printer, raise the media
loading lever, and correct the looseness in the
media.
Once the looseness is corrected, lower the
media loading lever.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
30

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English