-207
Loading cut sheet with a length of A4/Letter, A3/US B, and
Super A3/B
To load cut sheet media with a length of A4/Letter, A3/US B, and
Super A3/B, follow the steps below.
c
Caution:
As much as possible, keep your fingers off the printable surface of
the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light comes on.
3. Make sure that the paper lever is in the secured position. Then
load the sheet into the paper insertion slot until it meets
resistance. Make sure that the right edge of the paper is
straight and in line with the right edge of the scale on the roll
paper cover. PRESS PAUSE BUTTON appears on the LCD panel.
4. Press the Pause button.
The print heads move and the sheet automatically feeds into
the printing position. READY appears on the LCD panel.
To Next Page
Loading...
