Epson Stylus Pro 7500 - Test Menu

EPSON Stylus Pro 7500 Revision A
Adjustment Adjustment Steps 181
5.2.3.3 Test Menu
The Test menu tests or checks the operation of the control main board.
NOTE: *1. Function for which service is not necessary.
The menu items and their order in the menu are shown below.
Figure 5-3. Test Menu
Table 5-5. Test Menu Items
Test Item Description
Version
• Firmware program
• Backup parameters
• DIP-SW
• C299MAIN Board Rev.
• Panel Unit Rev.
Control Panel
•Panel buttons
• LCD panel display
• LED indicators
Sensors
CR HP / Cover Open / Paper Set Lever / P_EDGE / P_FRONT
/ P_REAR / Paper Thickness / Head SLID / Head Thermistor
B, C / I/C Present / Not Present / Ink End
Encoder CR Motor, PF Motor
Fan On/Off confirmation
Elec.
• Maintenance Record
• Fatal Error Record
D/A Revision Factory use for Head voltage correction - do not attempt *1
Head Signal Factory use for Head pulse check - do not attempt