Epson Stylus Pro 7500 - Periodic Maintenance Items

EPSON Stylus Pro 7500 Revision A
Maintenance General Maintenance Issues 237
6.1.1 Periodic Maintenance Items
The printer uses sensors and counters to determine when consumable items need to be
replaced. When a consumable part has reached its predetermined end-of-life according to
the corresponding counter, a message appears. See the table below for parts which require
periodic replacement.
Table 6-1. Parts That Require Periodic Replacement
Items LCD Message Description
Waste Ink Pads
(Maintenance Kit
SP7500,
#1058463)
“Maintenance Call 0100”
or
“Service Call 00000100”
Solution
Replace the following parts with the
parts in the Maintenance Kit;
• Waste Ink Pads
• Pump Assembly
• Cap Assembly
• Flushing Box
• Cleaner, Head
Required Adjustment
• Waste Ink Counter Clear (See
“Counter Clear” on page 210.)
Ink Tubes “Service Call 00000101”
Solution
• Check the ink tube
(The printer indicates this error when
the carriage has made a predetermined
number of passes; this indicates the
ink tubes should be replaced before
they wear out, causing air to enter the
ink tube or ink to leak.)
CAUTION
When replacing the waste ink pads, replace the pads in the waste ink
tank and not the whole tank. Put the old pads in a plastic bag and
throw away the used ink pads according to the laws and rules in your
area.