EPSON Stylus Pro 7500 Revision A
Adjustment Adjustment Steps 182
VERSION
This function confirms the firmware version and dip switch settings.
Figure 5-4. Version Menu Options
o
Concerning “Firmware,”
“LODDYM” is displayed. The explanation of this is as follows.
LO Fixed
DD Day
Y Year (Last digit of AD year)
M Month (Hex)
o Concerning DIP-SW
The DIP-SW mounted on the C299MAIN board is a 2-bit switch, with SW-1
displayed as the LSB and SW-2 displayed as the MSB.
Example: If JP1 = Shorted (ON) and JP2 = Shorted, the display is “0x03.”
To Next Page
Loading...
