EPSON Stylus Pro 7500 Revision A
Adjustment Adjustment Steps 183
CONTROL PANEL
This function allows you to check the operation of the control panel buttons, LED
indicators, and LCD panel.
Figure 5-5. Control Panel Check
o
"Key" check
The name of the button that is pressed appears. Press the [Pause] button twice to
exit the "Panel: Key" function.
o "LCD" check
All dots turn on. If a dot is not on, the LCD is not working properly.
o "LED" check
The LED indicators turn on in the following order and the name of the indicator
appears on the LCD when that indicator turns on.
Power, Pause, Ink End (K, C, M, Lc, Lm, and Y), Paper Out, Cut, Roll Cut Off,
and Sheet.
SENSORS
This function allows you to confirm whether the sensors are operating properly. The current
status (ON or OFF) of the sensors (one at a time) is shown in the LCD display, and you
need to check the sensor operation by hand. For example, to check the Paper Set Lever
position sensor, move the lever up and down.
Figure 5-6. Sensor Menu Options
To Next Page
Loading...
