EPSON Stylus Pro 7500 Revision A
Product Description Panel Setting Menu 41
1.6.3 Printer Status Menu
The status of the status items of the printer status menu listed in the following table can be
displayed in the LCD. Each type of status can be displayed by operating the following panel
buttons.
o Printer status menu selection: See the panel setting menu procedure.
o Status item selection: “Paper Source” Button
Mode End: “Pause” Button
The list of setting items in the printer status menu is shown below.
*1 The remaining amount of each color of ink is displayed as follows.
*2 Calculation Method: The number of cuts is summed and calculated.
(Life (A1) = 2,000 times)
The counter is cleared by the cutter replacement operation.
Display: The display is as follows.
*3 Calculation Method: The bi-directional remaining amount of main pad A/B is counted and
the smallest remainder is displayed. The display format is as shown below.
Table 1-26. List of Setting Items in the Printer Status Menu
Display Contents
VERSION Displays the firmware version (B 0 [_] [_] [_] [_] )
INK LEFT - K Displays the remaining ink level (Black) *1
INK LEFT - C Displays the remaining ink level (Cyan) *1
INK LEFT - M Displays the remaining ink level (Magenta) *1
INK LEFT - LC Displays the remaining ink level (Light Cyan) *1
INK LEFT - LM Displays the remaining ink level (Light Magenta) *1
INK LEFT - Y Displays the remaining ink level (Yellow) *1
CUTTER LIFE Displays the remaining life on the paper cutter. *2
TOTAL PRINTS Displays the cumulative total number of sheets printed.
WASTE INK Displays the waste ink counter value. *3
CR MOTER Displays the CR motor life monitor value. *4
PF MOTER Displays the PF motor life monitor value. *5
HEAD UNIT Displays the head unit life monitor value. *6
CREANER Displays the cleaning unit life monitor value. *7
Table 1-27. Remaining Ink Counter Display List
Remaining Ink Panel Display INK End LED
100 ~ 81% remaining E ***** F Off
80 ~ 61% remaining E **** F Off
60 ~ 41% remaining E *** F Off
40 ~ 20% remaining E ** F Off
20% ~ Up to just before near end E * F Off
Near end up to just before ink end n n% Flashing
Ink End 0% Lights up
Table 1-28. Cutter Remaining Times Counter Display List
Cutter Remaining Times Panel Display
100 ~ 81% remaining E ***** F
80 ~ 61% remaining E **** F
60 ~ 41% remaining E *** F
40 ~ 20% remaining E ** F
20% ~ 1% remaining E * F
Less than 1% remaining E F
To Next Page
Loading...
