Epson Stylus Pro 7500 - Counter Clear

EPSON Stylus Pro 7500 Revision A
Adjustment Adjustment Steps 210
COUNTER CLEAR
This function resets (to the original condition) the following counters which are stored in
memory on the Main Board.
Note *: "1" means the flag is set, and the next time power is turned on the printer will perform an
initial ink charge.
Table 5-13. Counters Reset by "Counter Clear"
Counter Reset Value
Protection Counter A/B
0
Ink Volume Counter Rb/ Ry/ Rx/Rz
0
Consumed Ink Counter Cb/ Cy/ Cm/ Cc/ Clm/ Clc
0
Power Cutoff Timer T2
0
Accumulated Prints Timer
0
CL Timer
0
CL Timer 3
0
CL Flag
0
Initial Charge Flag
1*
Periodic Pseudo-Vacuum Flag
0
CAUTION
Before clearing the Waste Ink Counter or the Consumed Ink Counter,
make sure you replace the following parts with new parts.
n Waste Ink Pads
n Flush Box
n Pump Assembly
n Cap Assembly
n Head Cleaner
The above parts are provided as [Maintenance Kit, SP-7500 1058463 ].