Epson Stylus Pro 7500 - Product Life Information

EPSON Stylus Pro 7500 Revision A
Maintenance General Maintenance Issues 238
6.1.2 Product Life Information
The table below shows the product life about the printer body, each mechanism and various
parts. Information regarding to the product life can be checked by the following way.
o Panel Setting: “Printer Status Menu”
The amount of ink remaining is indicated on the LCD. (“F*****E” - F = full, E =
empty, and each asterisk * represents a percentage of the total ink.)
Also, the counters which record these values can be initialized by “Maintenance
Mode 2”.
o Self-Diagnostic Function: from the “Test” menu select “Check: Maintenance”
CAUTION
Do not perform the counter initialization without replacing the
corresponding parts and checking their operation. Since the counters
for “Waste Ink Life” and “Ink Remaining Quantity” influence printer
operations, do not clear them unnecessarily.
Table 6-2. Product Life Information
Items Setting value Notes Result = Error
Printer 20,000 pages A1 paper
No
Printheads 2 billion dots Each nozzle
No
Waste Ink Pads
Right head: 84779 points
Left head: 56519 points
1 point = 0.02ml
Yes
CR Motor 7,500,000 passes
1 pass =1 round trip
*Ink tube life is
monitored based on this
counter value.
Yes
PF Motor 23,000 meters Paper feed distance
No
Cutter 2,000 operations
1 operation = cut one
page
No