Epson Stylus Pro 7500 - Interfaces; Parallel Interface; Compatibility Mode

EPSON Stylus Pro 7500 Revision A
Product Description Interfaces 23
1.3 Interfaces
This printer is equipped with a parallel and a USB interface as standard equipment. As an
option, it can also be equipped with a Type B Interface.
1.3.1 Parallel Interface
COMPATIBILITY MODE
o
Data transfer format: 8-bit parallel, IEEE-1284 interchangeable
o Synchronization Method: External supply / by Strobe pulse.
o Handshake: By BUSY and /ACKNLG signals.
o Logic Level: TTL compatible level
(IEEE-P1284 Level 1 device)
o Applicable Connector: 57-30360 (Amphenol) 36-pin or comparable
product.
* It is recommended that the shortest possible
interface cable be used.
o Signal Arrangement and Signal Names: See the table below.