Epson Stylus Pro 7500 - Page 213

EPSON Stylus Pro 7500 Revision A
Adjustment Adjustment Steps 213
o
Ink Parameters
You can reset the Initial Ink Charge flag, causing the printer to perform the initial
ink charge the next time the printer is turned on.
Figure 5-43. Ink Parameter Update Operation
o
Dot Shift Mode
This mode sets an offset for the adjustment value in Bi-D adjustment pattern No. 4.
The initial setting is “Single Print.”
CAUTION
If “Pair” is set based on the evaluation results, it will be judged that
there is shifting of the adjustment results in the “Inter row
corrections) in Bi-D No. 4, so the setting should absolutely not be
changed in servicing.
If you change the setting, it will cause color irregularity (vertical
direction), so adequate caution should be taken.