Epson SureColor SC-T3000 User Manual

Item Description
Paper Feed
Adjust
Pattern Use this setting if you are unable to resolve
banding issues (horizontal striped lines or uneven
colors) in the standard print area (for cut sheets,
the area excluding the 1 to 2 cm strip at the bottom
of the paper) even after head cleaning or head
alignment.
Pattern Selected
Press the Z button to print an adjustment
pattern. Measure the distances between the “+”
symbols in the printed adjustment pattern.
Use only the distance between the center symbols
or the average of the distances between the left,
center, and right symbols.
After the adjustment pattern is printing, the length
of the pattern will be displayed in the control
panel. Press the u/d buttons to enter the
measured value and press the Z button.
Value Selected
Choose an adjustment between -0.70 and +0.70%.
Selecting too small a value causes dark bands;
adjust the amount upward. Similarly, choosing too
large a value causes white bands; adjust the
amount downward.
Value
Paper Suction -4 to 0 It is important to choose the appropriate amount
of suction for the paper used in order to maintain
the correct distance between the paper and the
print head. Choosing too high a value for thin or
soft paper will increase the distance between the
paper and the print head, causing print quality to
decline or preventing the paper feeding correctly.
If this happens, lower the paper suction. The
suction power is weakened when the parameter is
lowered.
Roll Paper
Tension
Normal
Select High or Extra High if the paper wrinkles
during printing.
High
Extra High
Remove Skew
On Select whether to enable (On) or disable (Off)
paper skew reduction.
Off
Setting Name Enter a name of up to 22 characters for custom paper settings. Choose an
easy-to-remember name for quick selection.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Using the Control Panel Menu
106

Epson SureColor SC-T3000 Specifications

General

Color	Yes
Printing colors	Cyan, Magenta, Matte black, Photo black, Yellow
Print technology	Inkjet
Maximum resolution	2880 x 1440 DPI
Page description languages	HP-GL/2, HP-RTL
Package depth	1125 mm
Package width	787 mm
Package height	825 mm
Package weight	60910 g
Media thickness	0.08 - 1.5 mm
Maximum print size	A1 (594 x 841 mm)
Paper tray media types	Plain paper
ISO A-series sizes (A0...A9)	A1, A2, A3, A4
ISO B-series sizes (B0...B9)	B2, B3, B4
Display	LCD
Country of origin	Japan
Maximum internal memory	256 MB
Sound pressure level (printing)	50 dB
Number of power supply units	1
Power consumption (standby)	0.4 W
Power consumption (typical)	54 W
Power consumption (PowerSave)	3 W
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack	1 pc(s)