Epson SureColor SC-T3000 User Manual

Making Settings for Mac OS X
A
Display the print dialog and select Printer
Settings from the list.
U “Basic Printing Methods(Mac OS X)” on
page 48
B
Click the Select Target for Mode and select
CAD/Line Drawing(Black) or CAD/Line
Drawing(Color).
Note:
The CAD/Line Drawing(Black) and CAD/Line
Drawing(Color) options are available for Select
Target when a paper type suited to printing CAD
drawings is selected.
C
Check other settings, and then start printing.
Borderless Printing
You can print your data without margins on the paper.
The types of borderless printing you can choose vary as
shown below depending on the media type.
Roll Paper: No margins for all edges, no margins for the
left and right
Cut Sheets: No margins for the left and right only
(Borderless printing is not available with poster board.)
When printing borderless for all edges you can also
configure the cutting operation.U “About Roll Paper
Cutting” on page 69
When performing left and right borderless printing,
margins appear on the top and bottom of the paper.
Top and bottom margin values U “Printable area” on
page 51
Types of Borderless Printing
Methods
You can perform borderless printing using the
following two methods.
❏ Auto Expand
The printer driver enlarges the print data to a size
slightly larger than the paper size and prints the
enlarged image. The sections which are beyond the
paper edges are not printed; therefore, resulting in
borderless printing.
Use settings such as Page Layout in the applications
to set the size of the image data as follows.
- Match the paper size and page setting for the print
data.
- If the application has margin settings, set the
margins to 0 mm.
- Make the image data as large as the paper size.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
More Ways to Print
67

Epson SureColor SC-T3000 Specifications

General

Color	Yes
Printing colors	Cyan, Magenta, Matte black, Photo black, Yellow
Print technology	Inkjet
Maximum resolution	2880 x 1440 DPI
Page description languages	HP-GL/2, HP-RTL
Package depth	1125 mm
Package width	787 mm
Package height	825 mm
Package weight	60910 g
Media thickness	0.08 - 1.5 mm
Maximum print size	A1 (594 x 841 mm)
Paper tray media types	Plain paper
ISO A-series sizes (A0...A9)	A1, A2, A3, A4
ISO B-series sizes (B0...B9)	B2, B3, B4
Display	LCD
Country of origin	Japan
Maximum internal memory	256 MB
Sound pressure level (printing)	50 dB
Number of power supply units	1
Power consumption (standby)	0.4 W
Power consumption (typical)	54 W
Power consumption (PowerSave)	3 W
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack	1 pc(s)