More Ways to Print
Enlargements and
Horizontal and Vertical
Banners
The printer driver can enlarge or reduce documents for
different paper sizes. There are three setting methods.
Before printing at non-standard sizes, including vertical
or horizontal banners and documents with equal sides,
enter the desired paper size in the printer driver.
U “Printing at Non-Standard Sizes” on page 64
❏ Fit to Roll Paper Width
Automatically enlarges or reduces the image size to
fit the roll paper width.
❏ Specify Size
You can specify the enlargement or reduction ratio.
Use this method for a non-standard paper size.
A4
1000mm
❏ Fit to Output Size
Automatically enlarges or reduces the image size to
fit the paper size.
Note:
❏ When printing from applications designed expressly
for horizontal or vertical banners, adjust printer
driver settings as described in the application
documentation.
❏ When using Windows applications designed for
horizontal or vertical banners, select Banner in the
Advanced tab as required.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
More Ways to Print
58
To Next Page
Loading...
