Epson SureColor SC-T3000 User Manual

Cut Sheets
Cut sheets are automatically ejected to the rear,
where they can be removed by hand.
Poster Board
Poster board is partially ejected to the front.
Supporting the board with one hand to prevent it
falling, press the Z button and pull out the
board.
If the next job will not use poster board, lower all
the poster board supports. Leaving the supports
raised may cause paper to jam.
To lower the supports, grasp them as shown, pull
them diagonally downward, and then release.
D
Follow the on-screen instructions to load the
paper for the next job.
Using the Paper Basket
The paper basket collects paper from the printer,
preventing it falling to the floor and becoming creased
or dirty.
The optional Stand (24”) for the SC-T3000 Series comes
with a paper basket.
It can hold up to 20 sheets of the following types of paper
printed in line drawing mode.
Paper Size Media types
A1 (594 × 841 mm) Plain Paper Roll
US D (22 × 34 in)
A0 (841 × 1189 mm)
*
US E (34 × 44 in)
*
* Not supported by the SC-T3000 Series.
Paper not of the above types must be removed from the
printer one at a time before the next sheet is printed.
c
Important:
Collecting consecutive sheets of other types in the
paper basket may result in stains, folds, or other
damage to the printed sheets.
The paper basket can hold sheets up to 1189 mm long.
Note:
Close the paper basket before printing banners or other
documents that exceed the maximum length. Before the
paper ejected from the printer touches the floor, we
suggest that you take it in both hands close to the paper
eject guides and continue to lightly support it until
printing is complete.
Closing the Paper Basket
Close the paper basket before loading paper or moving
the printer.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Basic Operations
37

Epson SureColor SC-T3000 Specifications

General

Color	Yes
Printing colors	Cyan, Magenta, Matte black, Photo black, Yellow
Print technology	Inkjet
Maximum resolution	2880 x 1440 DPI
Page description languages	HP-GL/2, HP-RTL
Package depth	1125 mm
Package width	787 mm
Package height	825 mm
Package weight	60910 g
Media thickness	0.08 - 1.5 mm
Maximum print size	A1 (594 x 841 mm)
Paper tray media types	Plain paper
ISO A-series sizes (A0...A9)	A1, A2, A3, A4
ISO B-series sizes (B0...B9)	B2, B3, B4
Display	LCD
Country of origin	Japan
Maximum internal memory	256 MB
Sound pressure level (printing)	50 dB
Number of power supply units	1
Power consumption (standby)	0.4 W
Power consumption (typical)	54 W
Power consumption (PowerSave)	3 W
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack	1 pc(s)