EasyManuals Logo

Epson SureColor SC-T3000 User Manual

Epson SureColor SC-T3000
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Removing the roll paper
This section describes how to remove and store roll
paper after printing. The pressure rollers may leave
impressions on paper that is left in the printer.
Buttons that are used in the following settings
A
Confirm that the printer is ready and press the
( button.
The Load/Remove Paper menu will be displayed.
B
Press the d/u buttons to highlight Remove
Paper and press the Z button.
If On is selected for Roll Paper Remaining, the
printer will automatically print a barcode.
C
The paper will automatically be rewound.
Once the paper is rewound, the printer will
display Press
and load paper.
Note:
When the display shows Turn roll paper adapter
to wind up roll paper, open the roll paper cover and
rewind the paper by hand.
D
Open the roll paper cover.
Note:
When removing the roll paper, you can use the
optional roll paper belt to prevent the roll paper
from unwinding.
E
Raise the roll lock lever.
F
Holding the paper by the roll adapters, move the
roll to the roll rest.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Basic Operations
28

Table of Contents

Other manuals for Epson SureColor SC-T3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson SureColor SC-T3000 and is the answer not in the manual?

Epson SureColor SC-T3000 Specifications

General IconGeneral
ColorYes
Printing colorsCyan, Magenta, Matte black, Photo black, Yellow
Print technologyInkjet
Maximum resolution2880 x 1440 DPI
Page description languagesHP-GL/2, HP-RTL
Package depth1125 mm
Package width787 mm
Package height825 mm
Package weight60910 g
Media thickness0.08 - 1.5 mm
Maximum print sizeA1 (594 x 841 mm)
Paper tray media typesPlain paper
ISO A-series sizes (A0...A9)A1, A2, A3, A4
ISO B-series sizes (B0...B9)B2, B3, B4
DisplayLCD
Country of originJapan
Maximum internal memory256 MB
Sound pressure level (printing)50 dB
Number of power supply units1
Power consumption (standby)0.4 W
Power consumption (typical)54 W
Power consumption (PowerSave)3 W
USB connectorUSB Type-A
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack1 pc(s)

Related product manuals