Epson SureColor SC-T3000 User Manual

Pull the paper straight through until the leading
edge of the paper reaches the lines on the poster
board supports as shown.
Note:
Do not touch the paper where it will be printed.
After loading the roll paper, rotate the roll paper
adapters as shown to feed the paper through.
L
Lower the roll lock lever.
M
Following the on-screen instructions, press the
Z button.
The paper will be fed into the printer.
N
Close the roll paper cover.
O
Check the media type.
If a barcode giving information on the paper is
printed on the roll
The printer will automatically read the barcode
as the paper is fed; no message is displayed. The
printer is ready to print when Ready is displayed.
If a barcode giving information on the paper is
not printed on the roll
The printer will display the Paper Type and Roll
Paper Remaining settings for the paper currently
selected with the printer. To print at current
settings, press the d/u buttons to highlight Keep
Settings Above and press the Z button. To
change settings, highlight Change Settings and
press the Z button. U “Viewing and
Changing Media Settings” on page 35
Cutting the roll paper
Either of the following two methods can be used to cut
roll paper after printing.
❏ Auto Cut:
Cut the roll paper after printing each page
automatically using the built-in cutter.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Basic Operations
26

Epson SureColor SC-T3000 Specifications

General

Color	Yes
Printing colors	Cyan, Magenta, Matte black, Photo black, Yellow
Print technology	Inkjet
Maximum resolution	2880 x 1440 DPI
Page description languages	HP-GL/2, HP-RTL
Package depth	1125 mm
Package width	787 mm
Package height	825 mm
Package weight	60910 g
Media thickness	0.08 - 1.5 mm
Maximum print size	A1 (594 x 841 mm)
Paper tray media types	Plain paper
ISO A-series sizes (A0...A9)	A1, A2, A3, A4
ISO B-series sizes (B0...B9)	B2, B3, B4
Display	LCD
Country of origin	Japan
Maximum internal memory	256 MB
Sound pressure level (printing)	50 dB
Number of power supply units	1
Power consumption (standby)	0.4 W
Power consumption (typical)	54 W
Power consumption (PowerSave)	3 W
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack	1 pc(s)