Epson SureColor SC-T3000 User Manual

c
Important:
Connect the scanner directly to the printer.
Enlarged copies are only available when the
scanner is connected directly to the printer.
Making Enlarged Copies
Buttons that are used in the following settings
A
Turn the printer and scanner on.
The devices may be turned on in any order.
B
Load the printer with paper that supports
enlarged copies.
U “Epson Special Media Table” on page 139
C
Place the original on the scanner glass or in the
auto document feeder (ADF).
U “Placing Documents in the Scanner” on
page 63
For information on using the scanner, see the
documentation supplied with the device.
D
After confirming that the printer is ready, press
the l/r buttons to highlight + tab and press the
Z button.
The enlarged copy dialog is displayed.
E
In the enlarged copy dialog, press the u/d
buttons to choose the number of copies and press
the Z button to start copying.
To change copy settings or the enlargement ratio,
press the Menu button. The Enlarged Copy
menu is displayed.
The scanner ] button can be used in place of the
Z button to start copying.
Using the Enlarged Copy menu U “Menu
Operations” on page 99
Settings U “Enlarged Copy menu” on
page 112
Note:
If Other Size is selected for Auto and A0(2Sheets)
for Output Size when the SC-T3000 Series is used,
the document will be printed on two sheets as
shown.
If the document is printed on an A2 width roll, the
two segments can be joined together with tape or
the like to create a complete A0 sheet. If the
document is printed on a wider roll, the margins
will have to be trimmed.
Placing Documents in the
Scanner
Failure to observe the following precautions when
placing the original in the scanner may result in reduced
print quality or scanning failures.
❏ Be sure to insert the original in landscape (wide)
orientation.
❏ If there are documents both on the glass and in the
ADF, the document in the ADF will be scanned.
Remove documents from the ADF before placing a
document on the glass.
❏ The ADF can not be used when:
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
More Ways to Print
63

Epson SureColor SC-T3000 Specifications

General

Color	Yes
Printing colors	Cyan, Magenta, Matte black, Photo black, Yellow
Print technology	Inkjet
Maximum resolution	2880 x 1440 DPI
Page description languages	HP-GL/2, HP-RTL
Package depth	1125 mm
Package width	787 mm
Package height	825 mm
Package weight	60910 g
Media thickness	0.08 - 1.5 mm
Maximum print size	A1 (594 x 841 mm)
Paper tray media types	Plain paper
ISO A-series sizes (A0...A9)	A1, A2, A3, A4
ISO B-series sizes (B0...B9)	B2, B3, B4
Display	LCD
Country of origin	Japan
Maximum internal memory	256 MB
Sound pressure level (printing)	50 dB
Number of power supply units	1
Power consumption (standby)	0.4 W
Power consumption (typical)	54 W
Power consumption (PowerSave)	3 W
USB connector	USB Type-A
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack	1 pc(s)