EasyManuals Logo

Epson SureColor SC-T3000 User Manual

Epson SureColor SC-T3000
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Note:
Held print jobs can be saved if On is selected for
Store Held Job in the control panel Setup menu.
The factory default setting is Off.
U “Setup menu” on page 107
Viewing and Printing Stored Jobs
Print jobs can be stored on the hard disk unit and
printed at a later date.
Print jobs selected for printing at a later date can be
printed directly from the hard disk unit without
increasing the load on your computer.
Print jobs are saved using the printer driver. U
“Saving Print Jobs to the Hard Disk Unit” on
page 56
Note:
Enlarged copy print jobs created with a
scanner attached to the printer can not be
saved to the hard disk unit.
Jobs printed from the following applications
are always saved to the hard disk unit.
For information on other applications, see the
software documentation or online help.
LFP Print Plug-In for Office
EPSON CopyFactory5
Saving Print Jobs to the
Hard Disk Unit
This section describes the print driver settings used to
save print jobs.
A
When you have created the data, click Print in
the File menu.
B
After confirming that the printer is selected, click
Printer properties or Properties to display
printer settings.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Using the Optional Hard Disk Unit
56

Table of Contents

Other manuals for Epson SureColor SC-T3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson SureColor SC-T3000 and is the answer not in the manual?

Epson SureColor SC-T3000 Specifications

General IconGeneral
ColorYes
Printing colorsCyan, Magenta, Matte black, Photo black, Yellow
Print technologyInkjet
Maximum resolution2880 x 1440 DPI
Page description languagesHP-GL/2, HP-RTL
Package depth1125 mm
Package width787 mm
Package height825 mm
Package weight60910 g
Media thickness0.08 - 1.5 mm
Maximum print sizeA1 (594 x 841 mm)
Paper tray media typesPlain paper
ISO A-series sizes (A0...A9)A1, A2, A3, A4
ISO B-series sizes (B0...B9)B2, B3, B4
DisplayLCD
Country of originJapan
Maximum internal memory256 MB
Sound pressure level (printing)50 dB
Number of power supply units1
Power consumption (standby)0.4 W
Power consumption (typical)54 W
Power consumption (PowerSave)3 W
USB connectorUSB Type-A
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Quantity per pack1 pc(s)

Related product manuals