Product name Product
number
Explanation
Roll Paper Belt C12C890121 This holder keeps roll paper from unrolling after it is removed from the
printer.
U “Removing the roll paper” on page 28
Hard Disk Unit C12C843911
Use U “Using the Optional Hard Disk Unit” on page 55
Auto Take-up Reel Unit C12C815321 For the SC-T7000 Series. It can not be used with the SC-T5000 Series or
SC-T3000 Series.
Be sure to use with the auto take-up reel unit attachment. The auto
take-up reel unit can not be connected to the printer without the
attachment.
See the documentation supplied with the auto take-up reel unit for
information on installation.
Use U “Using the Auto Take-up Reel Unit (SC-T7000 Series Only)” on
page 39
Attachment for Auto Take-up Reel
Unit
C12C815411 For the SC-T7000 Series. It can not be used with the SC-T5000 Series or
SC-T3000 Series. This item is required when installing the auto take-up
reel unit.
Stand(24”) C12C844131 For the SC-T3000 Series. See the Setup Guide for assembly instructions.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
Appendix
138
To Next Page
Loading...
