E
Repeat steps 1 to 4 for the lower sheets.
F
Trim the bottom from the upper sheets by
cutting along the line joining the join guides (the
centers of the X marks).
G
Lay the upper sheet on top of the lower sheet.
Lineup the X marks as shown in the illustration
below, and temporarily fasten them using an
adhesive tape on the back.
H
With the two sheets overlapping, trim the excess
by cutting along the line joining the two cut
guides (the lines above the X marks).
I
Join the upper and lower sheets together.
Use an adhesive tape to stick the backs of the
sheets together.
SC-T7000 Series/SC-T5000 Series/SC-T3000 Series User's Guide
More Ways to Print
80
To Next Page
Loading...
