Chapter 3 Application Development Information
103
3
Application Development Information
This chapter describes how to control the printer and gives information useful for printer
application development.
How to Control the Printer
Use ePOS-Print XML to control the printer. See the appropriate manual for details.
Software and Manuals
The following software and manuals are provided for application development.
Utilities
Set a longer time to the timeout for printing graphics since it takes longer than printing
texts.
White lines may appear on the printed graphics.
It is recommended that you use Page Mode to print graphics.
To use the Utility, connect the printer with a PC for setting via the Micro-USB cable or
LAN cable. Connecting the printer with a PC via an wireless LAN is not possible.
After using the Utility, be sure to turn off the printer, and then turn it on.
Software/Manual Description
TMFLogo Utility (TM-FLOGO) The printer's non-volatile memory (NV
memory) is used to register store logos and
other similar information.
Memory Switch Setting Utility It is used when making changes to the
printer's memory switches and customized
value settings.
TM-i series WebConfig API User’s Manual See this manual when you use API to set or
check the settings for the TM-L90-i.
TM-i series PHP Setup Manual See this manual when you establish the
environment where you use the PHP
function and store data in micro SD cards
with the TM-L90-i.
ePOS-Print XML User’s Manual See this manual for details about the ePOS-
Print XML system configuration and
application development methods used for
this product.