EasyManuals Logo

Epson TM-L90-i Technical Reference Guide

Epson TM-L90-i
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
Chapter 2 Setup
83
2
Initializing the Network Setting
When network connection fails, follow the steps below to initialize the network setting to the
default.
The TMNet WebConfig password is also initialized.
1
Load the paper on the printer and turn on the printer.
2
Push and hold the push button for 10 seconds or longer.
The following initialization start message is printed.
Use a sharp-pointed object to press the push button.
3
20 to 25 seconds later, the following message is printed, and a status
sheet is printed out.
Do not turn off the power until the initialization is completed.
Push button

Table of Contents

Other manuals for Epson TM-L90-i

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson TM-L90-i and is the answer not in the manual?

Epson TM-L90-i Specifications

General IconGeneral
TypePOS printer
Character size0.99 x 2.4 mm
Print technologyThermal
Maximum resolution180 x 180 DPI
Country of originChina
Autocutter durability2 million cuts
Mean time between failures (MTBF)180000 h
Product colorGray
Maximum roll diameter90 mm
USB portYes
USB connectorMicro-USB Type-A, Micro-USB Type-B, USB Type-A
USB 2.0 ports quantity4
Connectivity technologyWired
Ethernet LAN (RJ-45) ports1
Storage temperature (T-T)-10 - 50 °C
Operating temperature (T-T)5 - 45 °C
Operating relative humidity (H-H)10 - 90 %
Wi-FiNo
Ethernet LAN data rates10, 100 Mbit/s
Package depth300 mm
Package width190 mm
Package height240 mm
Package weight3000 g
Quantity per pack1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth195 mm
Width145 mm
Height148 mm

Related product manuals